High Lift Jacks

This jack can be scooted under a bumper that is almost touching the ground and will raise the end of a heavily loaded vehicle to a height of 37" (just over 3 feet), giving ample room to remove high centers, fill voids, dig out sand or muck, put on tire chains or change a flat. If you slide off the road, you can maneuver your vehicle out of a ditch by placing this jack in a horizontal position against the bank and pushing sideways. Lifts 3 1/2 tons up to 48" and 60". Jacks are also available by special order.

Available Sizes:

• 48" Casting and Steel Jack (strong)
• 48" Casting Jack (stronger)
• 60" Casting and Steel Jack (strong)
• 60" Casting Jack (stronger)
• Our Casting Jack is manufactured from high yield and tensile strength grades of ductile castings, the same durable metal that we have used for nearly 100 years. Specifications for the Casting and Steel Jacks are exactly the same as the all Cast Jack. The difference between the two is that the Casting and Steel Jack contains some stamped high strength steel parts. We stamp and form the parts in-house; that allows us to offer the Jack at a lower price, yet still maintain the rigid quality standards that every Hi-Lift must meet.

LHL484 48" HILift Casting and Steel Jack

H/LHL485 48"Casting Jack

H/LHL604 60" HiLift Casting and Steel Jack

H/LHL605 60" Casting Jack